Vehicle-mounted hot-recycled asphalt pavement maintenance vehicle:fixed hotbox asphalt pavement maintenance vehicle (Model: ESN5161TXB) Vehicle-mounted hot-recycled asphalt pavement maintenance vehicle:fixed hotbox asphalt pavement maintenance vehicle (Model: ESN5161TXB) Vehicle-mounted hot-recycled asphalt pavement maintenance vehicle:fixed hotbox asphalt pavement maintenance vehicle (Model: ESN5161TXB) After the asphalt pavement is used for aperiod of time,
defects such as damage and deformation will occur successively,
collectively referred to as pavement diseases.
Common road defects in the earlydays are: cracks, pits, ruts, loose,
subsidence, bridgehead culverts, surfacedamage, etc.
If the road surface disease is not treated in time,
under the combined effect of traffic load and water,
the damage will develop rapidly,
which will increase the maintenance cost in the later period and even endanger the safety of the passengers.
The hot material heat-repairing process is one of the asphalt pavement disease treatment processes.
The heating equipment is used to repair the pavement on-site heat,
which can solve the joint problem well and significantly improve the construction quality.
The technology of recycling old asphalt concrete pavement is the on-site thermal
regeneration technology of asphalt pavement to heat and loosen the asphalt pavement surface,
spray emulsified asphalt, add new asphalt mixture, and then spread the paving and leveling,
compacting and forming, and achieve a certain depth within one time (generally not more than 60mm).
The thermal regeneration repairing machine series is an auxiliary equipment
for realizing the in-situ heat regeneration technology. The main construction processes include:
1. Determine the extent and depth of the damaged part, and fix the repairing plan
according to the actual situation. Appropriately move 5cm outside, so that the joint treatment effect is better;
2, clean up. Clean the dust, impurities, etc. in the disease area with a cleaning tool such as a broom;
3. Heat the area to be repaired with a heating plate, and set the time according to the road surface.
After a certain time, the road surface is softened;
4, softened road surface, cut edge;
5. Spraying emulsified asphalt to form alayer of bonded asphalt,
and outputting a new asphalt mixture that has beenkept warm from the silo;
6, paving and leveling, and then spraying anappropriate
amount of emulsified asphalt as a regenerant;
7, compaction equipment compaction. Repeatedcompaction from the side to the middle;
8, clean up the work area, open traffic,usually open in the summer traffic time is slightly longer.
ESUNbrand regeneration roads repair equipment
1.Vehicle-mounted hot-recycled asphalt pavement maintenance vehicle:
fixed hotbox asphalt pavement maintenance vehicle (Model: ESN5161TXB)
2.Vehicle-mounted hot-recycled asphalt pavement maintenance vehicle: separatedtype thermal regeneration maintenance vehicle (Model: CLYB-CYB1000)
3.asphalt pavementhot-repair trailerAsphalt FryingMachine (Drum Type) (Model: CLYB-ZS600)
4.CLYJ-TDA series trailer self-propelledmulti-function heating plate
(heating area 1.35-2m2 optional,partition heating)
5.ESNJ-L serieshand-held heating plate (heating area 0.35-1.5m2 optional,
someproducts can be partitioned heating)